Filter By:
Parts & Accessories

$16.00
The Travel Block balances your bicycle by raising the front wheel, helping you find the most comfortable position for training.
- Accessory for all home trainers
- Raises the front wheel, giving a better position for training
- Adaptable for road bikes and MTBs

$159.99
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training.
- Suitable for handlebars with a diameter ranging from 26mm to 35mm
- Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm

$169.99
- Replacement freehub body compatible with Neo 2T (T2875.60), Flux S (T2900S.60 A), Flux 2 (T2980.60 A) direct drive trainers
- NOT compatible with older generation Neo (T2800), Neo 2 (T2850/T2850.60), Flux (T2900), Flux S (T2900S/T2900S.60) and Flux 2 (T2980/T2980.60)

$169.99
This freehub body enables you to fit a Campagnolo cassette on the NEO Smart and the FLUX Smart. Suitable for 9 through 11 speed Campagnolo cassettes.
How to place the Campagnolo Body:
1. Remove the cap with a 5-millimeter Allen key.
2. Replace the Shimano/SRAM body with the Campagnolo body.
3. Place the cap on the Campagnolo body and tighten with a 5-millimeter Allen key.

$84.99
Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.

$49.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.

$15.99
Universal quick release skewer for placing your bike in the trainer or direct drive. This axle replaces the standard quick release, allowing racing bikes and mountain bikes to be used with Tacx trainers.

$99.99
- Large and rollable trainer mat
- Made from high quality, water-repellent 6mm thick foam
- Protects your floor against scratches and sweat
- Muffles noise and vibrations
- 180 x 85 cm

$39.99
The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.

$219.99
With the Tacx tablet stand you can place your tablet at a comfortable height and distance while using your bike trainer. Adjustable to different tablet sizes - length 182-267mm, width 112-197mm, max. thickness 13mm.

$29.99
The Tacx Sweat Cover protects your bike from corrosion caused by perspiration. It is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting.

$39.99
A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.

$139.99
Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.

$99.99
Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer.
It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.

$259.99
These remote "sprint" shifter pods can be added to the tops of a standard road bar as climbing shifters or used with aero bar extensions for an additional shift position. Each pod has two buttons and can be configured via the Stages LINK app device manager.
- Compatible with the StagesBike SB20 Smart Bike only
- 350mm wiring harness length

$92.99
Designed to provide hundreds of hours of indoor cycling comfort, the contemporary short-nose saddle shape with ergonomic cutout reduces pressure on sensitive areas. Ride-tuned MCU foam density provides the optimal amount of padding—not too soft, not too firm.
- Traditional CrMo rail design
- Seat Mast not included

$415.78
Have another rider in your household who prefers a different saddle? Grab a second seat mast and swap them out in seconds between rides. With 335mm of height adjustment, 80mm of fore/aft adjustment and permanent laser-etched scales, it's quick and easy to dial in your precise fit every time.
- Universal saddle clamp works with most saddle rail designs
- Saddle not included

$99.99
The Giant Indoor Trainer Mat is the perfect noise-reducing floor protection for indoor training.
- Rubberized material for easy rinse off after your workout
- ‘Pebbled’ surface, anti-skid and scratch-resistant material protects flooring while working out
- Extra-large 3’ x 6’ (91.5cm x 183cm) size covers entire workout area, prevents perspiration from getting on carpets or wood floors
- Comes rolled-up in draw-string, mesh carry bag with shoulder strap

The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.
Page 1 of 1