Other

$39.00 - $49.00
Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain.
- Optimized for using a Shimano XT 8000 or XTR 9000 Rear Derailleur with a 10-42, 10-44, 11-45, 11-46 rear cassette setup
- Compatible with M8000 (XT) and M9000 (XTR) series eleven-speed Shimano rear derailleurs
- Double chainrings are not currently supported
- Triple chainrings are not supported
- Direct Mount-native frames and SRAM derailleurs are not supported

$49.00
The RoadLink DM (Direct Mount) is the RoadLink designed to fit Shimano’s current generation R8000 Ultegra and R9100 Dura-Ace rear derailleurs. It serves as a simple device to offset the position of the rear derailleur, making it possible to run a wide-range mountain bike style cassette. It’s an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter.
- Fits Shimano R9100-generation Dura-Ace and R8000-generation Ultegra rear derailleurs
- CNC machined from 6061-T6 aluminum with stainless steel bolt
- Does not change the derailleurs total chain wrap capacity
- Fits standard derailleur hangers only
- Best used with Single or Double Setups - see manufacturer's site for more details

$79.00
Tanpan allows the usage of Shimano Road Shifters with Shimano Dynasys rear derailleurs. Built to translate the differing cable pulls between the two systems, Tanpan allows for wider gear range, more gear options and better chain security with clutch derailleurs for road or gravel drivetrains.
- Not Compatible with Tiagra 4700
- Compatible with most road, CX and gravel bikes
- Designed to mount directly to adjuster-free cable stops on Shimano rear derailleurs
- Certain chainring and cassette configurations benefit from a Goatlink
- If the rear derailleur cable is routed internally through the chainstay and exits at the end of the - chainstay above the axle or past the axle out the very end, you will need to utilize the inline ferrule
$25.00
The Whisky compression plug for carbon forks is reliable and easy to use. The simple design offers excellent support and function, works great with Whisky carbon forks, and may fit other manufacturer's forks as well.

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$49.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws

$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances.
- CNC machined 6061 aluminum
- Black anodized finish
- For carbon frames, use (2) M3x8 Flat head screws
- For all non-carbon frames, use (2) M3x10 Flat head screws

$55.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$35.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$45.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (2) M4x8 Flat head screws included

$49.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Ghost #EZ1954 - (2) M4x8 Flat head screws included

$49.00
Replacement derailleur hanger for Specialized 135mm SCS system compatible frames when using a SCS 135mm road disc hub. Hanger has a 2.5mm offset to allow for proper derailleur alignment. Do not confuse with Wheels Mfg DROPOUT-146, which is for Specialized non-SCS frames. All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (2) M3x8 Flat head screw included

$36.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$50.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces GT part #K33177 - Attaches to frame with (1) M8 chainbolt (sold separately) - CNC machined 6061 aluminum - Black anodized finish

$45.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$49.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$35.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws

$14.00
- Use without washers for two chainrings, with washers for one DH ring
- Bolts and nuts use hex keys
- Includes 15 pieces total; 5 nuts, 5 bolts, 5 washers
- Length: 8mm
- Material: Steel
- Type: Hex

$20.00
Adapters to convert your flat mount frame or fork to post mount.
- FF-1 front 140mm rotor
- FF-2 front 160mm rotor
- FR-1 rear 140mm rotor
- FR-2 rear 160mm rotor

$19.00
Flat mount front adapter for both 140mm or 160mm rotors. All mounting hardware included in package.

- Converts 140 post mount to 160 or 160 post mount to 180mm
- Simplified and lower profile design allows for the use of only 2 bolts instead of 4
- Compatible with all TRP and Tektro disc caliper 160, 180, and 203 rotor sizes

$19.00
- Wears and functions like other links on the chain
- SIL-TEC surface treatment
- Tool free installation possible
- TL-CN10 is available as SM-CN900-11
- Single use

$139.99 - $199.00
Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.

$36.99 - $49.00
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.

$22.99 - $29.00
Shimano Front Derailleur Braze-On Adaptors allow you to run a braze-on style front derailleur on a frame that doesn't have a front derailleur braze-on mount. Multiple sizes cover fitment on most frames.

$199.00
- Internal junction-A with two e-Tube ports
- Externally facing charging port eases charging, especially for internal batteries
- Mounts in road bar end or in frames with an integrated mounting point
- For easier cable routing, use along with EW-JC130 three-way e-Tube cable
Page 1 of 2
Next page