Lighting

- Powerful COB 50 chip LED - Micro-USB charging cable included - Weather-tough water resistant design - Flashing low battery indicator - Dual orientation universal rubber bracket

SEEMEE 30 is a new version rear light with high transparent optical lens and ambient light sensor. - EFFICIENT ENERGY CONSUMING--SEEMEE 30 emits stronger light outputs while consuming less energy with high transparent lighting strap, more efficient lighting performance comparing to traditional red case tail light. - DESIGN FOR YOUR SAFETY-- SEEMEE 30 lets you be seen from up to 800 meters, and its elegant translucent anti-scratch case provides 230 degree high side visibility, to make you more visible at risk moments. - AMBIENT LIGHT SENSOR-- Sensitive infrared light sensor built-in, automatically change the light mode according to environment, thus to increase warning effect during the day. - LOW POWER MODE-- When battery level is lower than 5%, SEEMEE 30 automatically changes to economic flash mode, which can run up to 20 minutes before it totally powers off. - IPX6 WATERPROOF RATE-- Storm or wind, SEEMEE 30 will resist the water from anywhere in any challenging environment. - COMPATIBLE FOR ALL-- Multiple mounting methods, solid silicon strap can be mounted safely to different bar shapes conveniently. - MEMERY FUNCTION AND MULTI-MODES -- Satisfy different riding scenarios. - CONVENIENT USB  - SIZE: 61x14x21mm. - WEIGHT: 24g.

Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.

- Battery tail lamp with reflector for rear rack - Compatible with 50mm, 80mm and 19mm (center mount) - Waterproof construct IPX4 - Built-in wide angle reflectors - Meets StVZO, RKF and Danish lamp standards - Meets StVZO Z, BS, UN IVA, UN IA and CPSC reflector standards - Low battery indicator - Tool-free battery replacement

- Maximum output to 20 lumens - ANSI certified lumens and runtime - IPX4 water resistant - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost, Strive, Lanza, Coveta, Liv Rev Comp and Luta series helmets

Perfect for E-city and E-trekking bikes, the fork mount puts the light directly on the fork crown above the mudguard, allowing space for a bag or shopping basket on the front of the handlebar.

- COB bright 10 chip LED - Micro-USB charging cable included - Weather-tough water resistant design - Flashing low battery indicator - Dual orientation universal rubber bracket

- COB bright 10 chip LED - Micro-USB charging cable included - Weather-tough water resistant design - Flashing low battery indicator - Dual orientation universal rubber bracket

A universal quick release mount that attaches to round-shaped drop and flat handlebars.

- 1 Super bright LED per light - Easy On/Off - Just push the lens - Weather-tough water-resistant design - Universal rubber bracket - Battery type: CR2032

Make sure you're seen with Serfas' UTL-SBK taillight. Its high, low, and flashing modes enhance your visibility, and the silicone body ensures durability. Integrated brackets let you easily affix it to your bike. Plus, an indicator light tells when it's time to plug this light into a USB port and recharge.

Bringing a rear light along is easy with Blackburn's magnetic Mars Taillight. - Red LED flashing light - 50 hours flash time - Strap to seat post - Clasp to sleeve - Wrap around dog collar

- 2 Super bright LED's per light - Soft yet durable Silicon casing - Weather-tough water resistant design - Universal rubber bracket

Magicshine tool-free helmet mount MJ-6058, compatible with most bike lights with the o-ring type mount. Attach your Magicshine Bike Light to your helmet. Adding a helmet mounted light to your existing bar mounted bike lights gives an enhanced night time riding experience. By positioning an extra light higher up you get added perspective, enabling faster and more technical riding on the mountain trails. The slightly larger attachment gives you some discretion over the angle of beam from your light head, meaning you can use the light for many other activities not just night riding. A Velcro strap allows the helmet mount to be fitted and removed from your vented helmet within seconds.

Sigma Rear Brake light. A simple little light with a big purpose — safety. Just clip this light on your rear brake cable and it will help alert anyone behind you that you are slowing down. Perfect for kids, commuters, and group rides! Fits U-brakes, V-brakes, canti's, road calipers, mechanical disc brakes, but won't fit hydraulics. Functions: - LED brake light with replaceable CR 1025 button cell battery (included) - Clearly visible, red brake LED during use - Burn time: approx. 200 hours continuous light, average of approx. 100,000 braking processes - Attaches to the rear brake cable using a 2.5 mm hex wrench (not included) - Quick and simple attachment - Attaches to cable actuated mechanical brakes (25 mm clearance) - Rounded brass screw to protect the brake cable - Five different colors are available to match any bike. - Robust, water-resistant housing - Weight: 7 g

Replacement mounting strap for the Strip Drive LED lights.

Replacement rubber end plug for the Strip Drive Front, Strip Drive Rear or Strip Drive Pro Rear lights

Replacement rubber end plug for the KTV Front, KTV Rear and KTV Pro Rear lights.

Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.

Replacement mounting strap for the Zecto and Femto LED lights.